I. Core Requirements of Russias Technical Regulation System

Russia imposesEquipment ImportsImplement a strict technical access system, enterprises need to focus on the following two major systems:

1. GOST R certification system(GOST R): Applicable to mechanical equipment not covered by the Eurasian Economic Union technical regulations, covering basic requirements such as mechanical safety, electromagnetic compatibility, and material strength
2. TR CU/EAC Certification: For products listed in the Eurasian Economic Union unified technical regulations (e.g., TR CU 010/2011 Machinery Safety Regulations), mandatory EAC marking is required

II. Specific Standards Machinery Equipment Must Comply With

1. Basic Machinery Safety Standards

• GOST EN 60204-1-2018 Safety requirements for electrical equipment of machines
• GOST 12.2.003-2018 General safety standards for production equipment
• ГОСТ ISO 12100-2013 Basic design principles for mechanical safety

2. Additional Requirements for Special Equipment

III. Key Stages of Certification Implementation Process

1. Product classification confirmation: Determine applicable regulations list through HS codes
2. Includes risk assessment reports, performance test data, clinical evaluation reports, etc.: Including design drawings, material certificates, risk assessment reports (requires Russian notarization)
3. Laboratory testing: Complete type testing in Russian accredited laboratories
4. Production audit: On-site assessment of the quality management system
5. Certificate registration: File through the FSA (Federal Accreditation Service) official website

IV. Guide to Avoiding Common Compliance Risks

• Marking specifications: EAC mark height must not be less than 5mm and must be permanently labeled
• Document validity: Single-batch certificates are only valid for the current customs clearance, while series product certificates are valid for 5 years
• Update requirements: Product design changes require re-submission of technical documents for review

Expert advice: It is recommended to start the certification process 6-8 months in advance, with special attention to the format specifications of Russian technical documents (GOST 2.104-2006)

V. Latest Regulatory Updates (2024 Edition)

• Expanded mandatory certification scope for welding equipment (TR CU 010/2011 amendment)
• Digital certification system launched: Electronic applications can be submitted via the GosUslugi platform
• Carbon footprint declaration requirements: Carbon emission grading system for heavy machinery to be implemented from 2025